Conference discussion, voting host

The digital control, power supply and voice communication of the intelligent host and the conference unit are transmitted by the same cable (eight core)
It can operate independently or externally with computer and other external devices to synchronize operation, which can realize computer management functions (mode or operation: free speech, first-in, first-out, etc., and can project meeting content and voting election results to the venue)
The following conference functions can be realized in a single unit: open conference, first-in first-out limit speech
The system has a high-quality sound channel effect
The following functions can be realized by combining software and peripheral devices: Open mode (PREE), advanced mode (FIFO), chairman-specific mode (C.Only), limited speech (LIMIT)
Configuring a video center processor for shadow tracking
You can choose to speak the number of microphones at the same time 1-9 (inclusive)
Built-in voting/election interface, connection to voting central controller and configuration of voting software for voting/election/rating function
Real-time check-in function: Dynamic display of check-in and voting results
The panel has an LCD display, 122×32 dot matrix display conference mode, with function keys and knobs on the panel for system adjustment or setting
It has four main cable terminals for connecting 60 groups of conference units with load and short circuit protection. Adding expansion equipment can realize 250 conference units for simultaneous use
3 sets of audio signal output terminals for external recording or audio equipment
Frequency response: 100Hz—18KHz
Total harmonic distortion: the sound output of the conference system is less than 0.1% at 100Hz-18KHz
Powered by AC220V
Can be installed in a 19-inch standard cabinet
(The real-time check-in system is to dynamically display the check-in and voting results. When the participant presses the button, the corresponding screen changes dynamically on the screen of the secondary screen.)