Power controller

YD-PWX8 rail type eight-way power controller can be used with programmable central control host communication to realize control of various peripheral devices. For example, it is used to control peripheral power supply such as lighting, sound sequencer, electric screen, electric curtain and projector.
Standard rail mounting accounts for 4 modulo digits;
★ Provide 8 channels of 16A switch execution modules, each circuit can independently control 3300W device switches;
★ You can set the initial value of each circuit;
★ Each device can set ID; provide 2 RS485 control interfaces
★ Multi-circuit sequence delay start function to avoid the impact on the grid caused by simultaneous startup;
★ Set two groups of interlocking modes to control 4 sets of curtains;
★ Set 3 groups of interlock mode, can control the low speed, medium speed and high speed gear of two central air conditioners;
★ Immediately after executing the scene command, return the actual switch status of each loop to the monitoring center;
★ Comes with emergency switch button for easy debugging;
★ Self-contained loop status indicator, the status of the switch is clear at a glance;
 

                                                                                                                                                                                               

Device supply voltage	DC24V 100mA
controlled loop	8 way normally open relay or 4 way curtains
Relay loop switching load (resistive)	AC250V/anti-surge capability up to 170A
One-way relay maximum switching current	16A
Relay Mechanical Durability	10,000,000 times
Relay durability	100,000 times
Control Interface	RS485 communication protocol: 9600, N, 8, 1 (2)
Installation	Standard 35mm rail mounting structure
Fire Interface	1×2 digit Phoenix terminal
Display interface	4× function button, 16× red LED
Appearance size (length * width * height)	71mm×95mm×65mm
weight	316g/pcs