YDIT professional sharing mixed matrix common problems and their processing methods

Source:YDIT 誉德 Release time:2019/9/7 8:49:44 Views:983

 

(Ultra-thin one lifter, paperless conference system) Question 1: The hybrid matrix is ​​not powered?
A: Check if the power switch fuse is blown.
Question 2: The hybrid matrix does not search for IP?
A: Check whether the control link is normal. Check whether the IP of the control end is on the same network segment as the matrix.
Question 3: There is no output in the hybrid matrix. Does the display screen show Out-No signal?
A: Check whether the matrix output interface is in good contact, and the hybrid matrix channel switching state is consistent with the previous liquid crystal display state.
Question 4: The mixing matrix has no input, and the display screen shows In-No signal?
Answer: Check whether the matrix input interface is in good contact, and the hybrid matrix channel switching state is consistent with the previous liquid crystal display state.
Question 5: Display display is not supported, image distortion, blur? (Ultra-thin integrated lifter, paperless conference system)
A: Display does not support, image distortion, blur is the mixed matrix output resolution is not the best resolution of the display, you can pull out the board dial code to set the monitor's optimal resolution.
Question 6: Why is the 4K*2K input only HDMI, the DP display can be displayed?
A: Currently only HDMI and DP can support 4K.
Question 7: The hybrid matrix buttons cannot be switched, and the remote control cannot be switched.
A: The LCD display can see if the button and remote control are locked. Check if the button, the remote control is locked, or if the remote control battery is powered or has a problem.
Question 8: What is the screen on the screen?
A: First reduce the input resolution. If it is still the same phenomenon, try the short line (slim one-piece lifter, paperless conference system).