YDIT professional summarizes the current frame type of LED display

Source:YDIT 誉德 Release time:2019/7/17 14:23:21 Views:887

 

(Ultra-thin integrated lifter, paperless conference system) LED display frame is divided into: in-line mounting bracket, simple frame, stainless steel or aluminum alloy frame.


(1) Inline mounting bracket
  Depending on the application, the frame requirements are different. The inline mounting does not require a frame, but requires a mounting bracket. The mounting bracket is usually made of aluminum profile, which is lighter and easier to cut. It can also use universal angle iron (that is, a rectangular iron bar with many holes). The copper post on the back of the unit board is used to fix the unit board to the bracket. The bracket should be longer and the mounting hole of the light box is reserved. Fix the unit board, control card, and power supply to the bracket. The data cable and the 220V power cable should be tied to the bracket with a nylon cable tie. After the tie, tie it to avoid falling. (Ultra-thin integrated lifter, paperless conference system)

(2) Simple box
  Aluminum frame can be used for making simple frame (for example, hollow aluminum strip with square cross section). If aluminum alloy frame is used, the screen of LED display is smaller, and the unit plate can be directly fixed on the outer frame. If the strength is sufficient, it is not needed. Support.

(3) Stainless steel frame or aluminum alloy frame
  Generally, the outer frame of the LED display screen is made of stainless steel. In fact, the outer frame of the stainless steel is only on the basis of a simple frame, and is covered with a thin layer of stainless steel skin. Looks beautiful and generous, adding added value. Usually, the production and assembly of the stainless steel frame or the aluminum alloy frame are processed after the size is determined. (Ultra-thin one lifter, paperless conference system)